Ocean Discover - Geotechnical survey drilling vessel -

Ocean Discover - Geotechnical survey vessel

-Geotechnical vessels search the ocean floor in search of oil reservoirs or soil quality for fixing structures in the seabed-

LOA - 45 M
Breadth Moulded - 11.25 M
Draft Moulded (EMPTY) - 3,00 M
Gross Mass - 57723.984375
Main Deck Dymensions - 268.75 m²
Fuel Oil (98%) - 60255.7773
Fuel Oil 2 (98%) - 44999.9921
Slurry Tank (98%) - 60255.777344
Main Engines - 2x Large Engines// 1200 RPM
Gen. Set - Auto.1x Large Engine// 1000 RPM
Service Speed - 12.0 Knots
Economy Speed - 8.0 Knots
Ballast Pumps- 8x Large Independent Ballast Pumps
Total Capacity - 12 Persons
Cost - $339532

-Features-

Radar system
3 radio systems
auto pilot waypoints system
AIS - automatic identification system
Weather system
Engine monitoring sistem
Manual ballast system
Drilling System
Anchoring sistem
Manoeuvrability system
Dynamic positioning
Fins stabilizer

-Drilling-

In the bridge anchor the vessel and turn dinamic position on (turn on positioning/Manoeuver system on first)

go to the drilling operation room

1-Release well head ship connectors

2-press well head down until the distance to seafloor is
around 0,6 m

3-turn on the well head seabed anchor

4-turn on the connector clamp

5-insert a rod in the connector (is better make this by hand because the crane is kinda difficult to use)

6-press connector slide down until the rod ends

-connecting two rods-

7-turn the rotary table clamp on

8-turn the connector and drill clamp off

9-in the seat press drill up until the first clamper is free from the rod

10-turn the drill clamp on and insert another rod

11-press drill slide down until the rods is aligned an press connect rods

12-wen the rod is in the well head port turn on the swivel clamp, rotary table and the slurry pumps

13-tur on the drll key and done! you drilling!

All the microcontroller credits for its creators (dont remenber all of them ;) )

👉 -- Discord server stormworks BR --https://discord.gg/XRDtWKxy

Any problem or doubt let me know!