OPV Condor Mk.I

Vehicle, Rescue, Sea, Multi-vehicle, Exploration, Delivery, Fire, Advanced, v1.0.34


The OPV Condor Mk.I is the eight build in the Coast Guard / rescue response ship series.

At 55.5 meters long, it's the largest of the series and has all the necessary features of an Offshore Patrol Vessel. As with all my other creations, I like to keep my designs simple and practical for better FPS and to minimize lag!



UPDATED - 13th February 2021
1. Updated heli rotor ge...

Author: Spider

Created: 8 Jul, 2020 @ 12:32pm

Updated: 12 Feb, 2021 @ 12:06pm

Subscribers: 97925


Size (unpacked) : 17.610 MB

The OPV Condor Mk.I is the eight build in the Coast Guard / rescue response ship series.

At 55.5 meters long, it's the largest of the series and has all the necessary features of an Offshore Patrol Vessel. As with all my other creations, I like to keep my designs simple and practical for better FPS and to minimize lag!



UPDATED - 13th February 2021

1. Updated heli rotor gear ratio and trim.


Features

1. Three water cannons including main turret.
2. Helicopter.
3. RHIB.
4. Diving compartment.
5. Lower deck cargo with elevator and side opening doors.
6. Auto stabilization.
7. GPS autopilot.
8. Bow collision warning (can be turned off).
9. Flares
10. Radar with variable range.
11. Map-to-screen monitor.
12. Basic FLIR HUD for better visibility in nighttime with heavy fog.
13. Solar panels for battery charging.
14. Heaters & clothing for Arctic missions.


Specifications

- Length : 55,5m
- Beam : 10.75m
- Top speed : 32 knots
- Power : 8 large diesel engines
- Fuel : 134,720 liters
- Crew : 2 Officer's bunk, 8 crew's bunk (16 beds), 2 medical beds.


How to use

1. Turn on engine fuel.
2. Press engine starter.
3. Turn off clutch to move forward.
4. For reverse, set to neutral first or the engine will stop.
5. Engine throttle is clamped with min 0.1 and max 1. Meaning, you can start the engine at 0 throttle and it won't die. To turn off engine, just shut off engine fuel.


How to store helicopter in hangar

1. Fold main and tail rotor.
2. Open hangar door.
3, Walk up to the rope anchors and press e/q to detach.
4. Push helo into hangar by running into skids from behind.
5. Continue pushing till helo locks into place.

*WARNING*

1. When exiting the pilot seat in the chopper while the rotor is still turning, press ctrl-f which makes you duck immediately or else your head might clip through the roof and the rotor will instantly decapitate you.

2. The heli and RHIB have a limited range of 6.5km from the ship. Traveling any further will cause them to disappear. To avoid this you can remove the default heli and spawn in this heli separately instead.





How to use RHIB

1. Open rear gate.
2. Release connector and RHIB will slide down tracks.
3. Release tracks and you're good to go.
4. For recovery, turn off release connector and tracks button, drive the RHIB into the docking bay and use small winch to secure it in place.


Credits

1. GPS Autopilot - Taijin
2. Radar - Sengir_vampire
3. Fuel Time (modified) - Catmandoe1


[www.buymeacoffee.com]

Please do not re-upload my creations under any circumstances. Making modifications to suite your own personal needs is fine but do not upload them to the workshop. It takes days, weeks and sometimes months to create a single ship or aircraft. Blatantly stealing someone else's work and uploading them as your own is NOT cool.

How do I download and install mods?

Simply click the blue button above. It will open the file hosting page with the mod repacked by us from the official source.

How do I install this mod?

See the 'How to install' tab.

Is this mod safe to use?

The mods are repacked as is, without any additional software, malware, or bloatware added. To check for viruses, use a reliable antivirus or upload the archive to a website like virustotal.com. Anyway, It's always a good practice to keep backups of your saves in case of mod incompatibility .

For vehicle mods

  1. Download the .zip archive containing the vehicle mod files.
  2. Locate your game's root folder.
  3. Navigate to rom\data\preset_vehicles_advanced and extract the files there.
  4. Rename both files to something recognizable, ensuring they share the same base name but different extensions.
  5. Launch the game and go to the Workbench's Presets tab to see the new vehicle mod.