SR-71 Blackbird | Fixed... Again.

Vehicle, Air, Exploration, Technical, Advanced, HOTAS, v1.1.6


EDIT: If you are planning to use this on a server with a large player count or weak processor, USE THIS VERSION INSTEAD https://steamcommunity.com/sharedfiles/filedetails/?id=2052243943


I figured I would try and do this aircraft justice. Tried to make it start up and fly like the real deal without adding too much clutter that has no in-game use, so its a weird balance between functional...

Розробник: /\ Rumi

Дата створення: 3 Apr, 2020 @ 12:13pm

Оновлено: 11 Mar, 2021 @ 6:28pm

Підписників: 95303


Розмір (розпакований) : 3.496 MB

EDIT: If you are planning to use this on a server with a large player count or weak processor, USE THIS VERSION INSTEAD https://steamcommunity.com/sharedfiles/filedetails/?id=2052243943


I figured I would try and do this aircraft justice. Tried to make it start up and fly like the real deal without adding too much clutter that has no in-game use, so its a weird balance between functionality and "cockpit simulation".

She's capable of just barely breaking mach 1, 360m/s top speed. The throttle is full range without any limits so you'll blow up the engines if you stay at 99% for too long, 98% is safe in a straight line, slow down a bit to turn.

The RSO (copilot) cockpit features a full pre-flight checklist, navigation controls, comms equipment, and a GPS guided camera that follows the map touch screen. Note: The navigation controls will only function if the pilot has "Hold Heading" and "Hold Altitude" enabled

If you don't happen to have a friend with you, heres the pilot's pre-flight checklist.

1/ Start ground cart

2/ (cockpit) Ground power ON

3/ APU ON

4/ APU Generator ON

5/ System power ON

6/ Brake ON

7/ Arm fire suppression systems

8/ Throttle to 5%

9/ Left and right fuel pumps ON

10/ Start engine 1

11/ Start engine 2, wait for RPS to level

12/ Throttle to 11%

13/ Generator 1 and 2 ON

14/ APU, APU generator, and ground power all OFF

15/ Disconnect left and right ground ports

16/ Disconnect service vehicle

17/ Enable nose wheel steering

18/ Left and right afterburner pumps on

19/ Throttle up for taxi, max of 15%

20/ Enable roll and pitch stabilization if it is lagging or you feel like you need it

21/ Throttle up and take off

22/ Raise landing gear

23/ Retract shock cones (THIS IS IMPORTANT, YOUR ENGINES WILL EXPLODE WITHOUT BETTER AIRFLOW)

Congrats! You are now ready for full throttle! Be careful though :)



IN THE CASE OF AN ENGINE FIRE

1/ Extinguish damaged engine ONLY

2/ Enable engine sync (doing so without a fire has a good chance of blowing up both engines)



Here is a standalone version of the service vehicle for those of you playing career mode: https://steamcommunity.com/sharedfiles/filedetails/?id=2048948407


Special thanks to these individuals for providing useful microcontrollers:
PenguinO
EndoSkull
winsatid62
The.Lemon
Sire 'Mi3ter ' VI
Niklas
Psychic Dart
Aero
Mr. Leonard
IamPhilipp
krimwand
SAKYamoney


NOTE: if you teleport it back to hangar, be sure to take it into the workbench before attempting to start it again

If you run into any problems with it, please let me know so I can fix them! She has a lot of messy logic so there's bound to be some issues I haven't found yet. If you have any problems or questions, post them here please.

And let me know if you use it in a video so I can enjoy your suffering ehe

Як завантажити моди?

Натисніть на кнопку вище та завантажте обраний мод з файлового сховища.

Як встановити мод?

Див. секцію "Як встановити".

Чи безпечний завантажуваний файл?

Моди перезаливаються нами з оригінального джерела, без жодних змін. Ми лише запаковуємо їх в звичайний архів. Додатково можете перевірити архів на наявність загроз за допомогою будь-якого антивірусу або онлайн-сканеру на кшталт virustotal.com. Також рекомендуємо робити резервні копії ваших сейвів, про всяк випадок.

For vehicle mods

  1. Download the .zip archive containing the vehicle mod files.
  2. Locate your game's root folder.
  3. Navigate to rom\data\preset_vehicles_advanced and extract the files there.
  4. Rename both files to something recognizable, ensuring they share the same base name but different extensions.
  5. Launch the game and go to the Workbench's Presets tab to see the new vehicle mod.