Submarine Aircraft Carrier MKV
Vehicle, Air, Rescue, Sea, Exploration, Delivery, Technical, Underwater, Mechanical, Advanced, Weapons, v1.6.11
Introducing the final version of the Submarine Aircraft Carrier.
Project air power far from your shores with the MKV.
About the vessel
MKV is a nuclear powered submarine aircraft carrier. This is the 5th and final revision of the hull type, completely modernised with advanced features and weaponry. The vessel can remain underwater indefinitely with infi...
Author: G_Tugg
Created: 20 Nov, 2021 @ 7:15am
Updated: 15 Jan, 2023 @ 5:16am
Subscribers: 55765
Size (unpacked) : 8.846 MB
Project air power far from your shores with the MKV.
About the vessel
MKV is a nuclear powered submarine aircraft carrier. This is the 5th and final revision of the hull type, completely modernised with advanced features and weaponry. The vessel can remain underwater indefinitely with infinite range, storing 2 VTOL fighters or medium lift helicopters in the hangar.
MKV provides the Navy with a near-undetectable maritime strike capability.
Improvements over MK4
Nuclear conversion
Max speed increased by 14kts
Depth hold at any speed
Waypoint Autopilot
New Software package
$140,000 unit cost reduction
Advanced manoeuvring thrusters
Armament upgrades - new SAM turret
Basic Operating Instructions
Fire up the reactor at the rear of the ship, the reactor operates at 350 degrees and takes a moment to warm up.
Diving is controlled by filling and emptying the ballast tanks. Dive planes (W/S) are sticky for smooth operation and can be used to control the pitch / trim of the vessel. The ship will dive nicely when moving or static.
Set the depth hold on the keypad (eg -10), this works when moving or static.
The additional storage tanks are for storing airlock fluid at depth and not required for diving.
Use the electrical connectors and winches to perfectly center the aircraft on the elevator.
The Airlock, Bilge pumps and air conditioning are automated for your convenience. Please read the airlock operation section below.
Main monitor, map and sonar are touchscreen.
Hangar fuel tank 1 is set to Jet Fuel, 2 is Diesel. There is a spawner in each tank to change fuel types.
Maximum wind state for hangar operation is around 40.
Operating the airlock
The airlock is semi-automatic and can be used at any depth.
In shallow water (upto around -20m) it is automatic and will pump water outside the ship by itself.
At depth, you must press the button in the chamber. it will store water in the front & rear tanks for pumping out later.
One must be mindful, there are only a finite amount of deep water airlock drains before the storage tanks are filled.
Take notice of the tank level warning indicator in the airlock room.
Controls for pumping the water out are in the main control room.
Please note that the side airlock room (on the tower) is still only suited for shallow dives.
Troubleshooting
Elevator stuck - press the button a couple of times
Torpedo tubes must be fully submerged to launch - torps are fire-and-forget
Do not start jet engines inside the hangar, the game does not know this situation and it will damage the engine. Start jet engines only from the flight deck.
Special Thanks
Big thanks to build partner (°□°) for their expertise on many of the ships advanced systems.
Sonars - Jackmino & Amiga87
Aircraft Shown - TR-34B / TR-34C
The Carrier Collection - https://steamcommunity.com/sharedfiles/filedetails/?id=2141238577
How do I download and install mods?
Simply click the blue button above. It will open the file hosting page with the mod repacked by us from the official source.How do I install this mod?
See the 'How to install' tab.Is this mod safe to use?
The mods are repacked as is, without any additional software, malware, or bloatware added. To check for viruses, use a reliable antivirus or upload the archive to a website like virustotal.com. Anyway, It's always a good practice to keep backups of your saves in case of mod incompatibility .
For vehicle mods
- Download the .zip archive containing the vehicle mod files.
- Locate your game's root folder.
- Navigate to
rom\data\preset_vehicles_advanced
and extract the files there. - Rename both files to something recognizable, ensuring they share the same base name but different extensions.
- Launch the game and go to the Workbench's Presets tab to see the new vehicle mod.