Puma Mk.III

Vehicle, Rescue, Sea, Exploration, Delivery, Fire, Advanced, v1.2.4


The Puma Mk.III is the fifth build in the Coast Guard / rescue response ship series and is roughly based on the Austal 39 Patrol Vessel.

At 39 meters long, it has all the necessary features of a fast fire/rescue response boat. As with all my other creations, I like to keep my designs simple and practical for better FPS and to minimize lag!



UPDATED - 25th June, 2021
- Chang...

Розробник: Spider

Дата створення: 1 Nov, 2019 @ 9:50am

Оновлено: 25 Jun, 2021 @ 6:17am

Підписників: 46893


Розмір (розпакований) : 8.567 MB

The Puma Mk.III is the fifth build in the Coast Guard / rescue response ship series and is roughly based on the Austal 39 Patrol Vessel.

At 39 meters long, it has all the necessary features of a fast fire/rescue response boat. As with all my other creations, I like to keep my designs simple and practical for better FPS and to minimize lag!



UPDATED - 25th June, 2021

- Changed propulsion to fluid jets.
- Increased fuel cap (100 to 131k).
- Speed increase (35 knots to 50 knots)


Features

1. Five water cannons including main turret.
2. Small RHIB.
3. Escape hatch and huge winch in lower cargo hold for deep sea operations.
4. Upper and lower deck cargo holds for storing cargo.
5. Power generator which will automatically turn on if main battery power drops below 60%.
6. Auto stabilization.
7. GPS autopilot.
8. Bow collision warning (can be turned off).
9. Auto cargo hold water pump (Water is automatically pumped out if water is detected).
10. Self uprighting (boat will automatically upright itself if capsized).
11. Radar with variable range.
12. Map-to-screen monitor.
13. Basic FLIR HUD for better visibility in nighttime with heavy fog.
14. Solar panels for battery charging.
15. Heaters for Arctic missions.


Specifications

- Length : 39m
- Beam : 8.75m
- Top speed : 50 knots
- Power : 8 large diesel engines
- Fuel : 131k liters
- Crew : 8 passenger seats, 2 medical beds, 8 beds, 1 pilot seat, 1 engineer seat


How to use

1. Turn on engine fuel.
2. Press engine starter.
3. Turn off clutch to move forward.
4. For reverse, set to neutral first or the engine will stop.
5. Engine throttle is clamped with min 0.1 and max 1. Meaning, you can start the engine at 0 throttle and it won't die. To turn off engine, just shut off engine fuel.


How to use RHIB

1. Open rear gate and detach power cable.
2. Start engine.
2. Release brakes and RHIB will slide down tracks.
4. Release connectors and you're good to go.
4. For recovery, drive the RHIB into the docking bay and use small winch to secure it in place.


Credits

1. GPS Autopilot - Taijin
2. Radar - Jecki1379
3. Radio - Sheepdog
4. Weather Monitor - jecki1379
5. Fuel Range Calculator - Dead_Lemon
6. Emergency Beacon Finder - Cake


[www.buymeacoffee.com]

Please do not re-upload my creations under any circumstances. Making modifications to suite your own personal needs is fine but do not upload them to the workshop. It takes days, weeks and sometimes months to create a single ship or aircraft. Blatantly stealing someone else's work and uploading them as your own is NOT cool.



Як завантажити моди?

Натисніть на кнопку вище та завантажте обраний мод з файлового сховища.

Як встановити мод?

Див. секцію "Як встановити".

Чи безпечний завантажуваний файл?

Моди перезаливаються нами з оригінального джерела, без жодних змін. Ми лише запаковуємо їх в звичайний архів. Додатково можете перевірити архів на наявність загроз за допомогою будь-якого антивірусу або онлайн-сканеру на кшталт virustotal.com. Також рекомендуємо робити резервні копії ваших сейвів, про всяк випадок.

For vehicle mods

  1. Download the .zip archive containing the vehicle mod files.
  2. Locate your game's root folder.
  3. Navigate to rom\data\preset_vehicles_advanced and extract the files there.
  4. Rename both files to something recognizable, ensuring they share the same base name but different extensions.
  5. Launch the game and go to the Workbench's Presets tab to see the new vehicle mod.