ENDAIR Beluga XL
Vehicle, Air, Rescue, Exploration, Delivery, Technical, Creative, Land, Mechanical, Stationary, Advanced, v1.1.18
ENDAIR Beluga XLThe ENDAIR Beluga XL is a SuperTransport aircraft developed by EPVIN Aviation Company
It has a Top speed of 240 Knots, Has a range of over 1000KM thanks to the new trent 700 engine and 280.000L of fuel spited into 2 tanks. Also features a realistic cockpit!
Tested to be lag and Multiplayer friendly while holding great shape and performance!
it has a huge cargo hold fo...
Author: EnderPilot
Created: 2 Apr, 2021 @ 12:50am
Updated: 8 Apr, 2021 @ 5:44am
Subscribers: 20338
Size (unpacked) : 18.257 MB
ENDAIR Beluga XL
The ENDAIR Beluga XL is a SuperTransport aircraft developed by EPVIN Aviation Company It has a Top speed of 240 Knots, Has a range of over 1000KM thanks to the new trent 700 engine and 280.000L of fuel spited into 2 tanks. Also features a realistic cockpit!
Tested to be lag and Multiplayer friendly while holding great shape and performance!
it has a huge cargo hold for Special Cargo Transport that can hold up to 3 A321 Cockpit modules!
or you can make your own 3 modules to load the plane with the Custom Pallet!
Discord
Get the latest updates about my plane projects on my discord server! : https://discord.gg/8YrrV9YJHM[Requires modded workbench or custom mission to spawn]
NOTE: PLEASE DO NOT MODIFY OR RE-UPLOAD THIS VEHICLE
COCKPIT FEATURES:
- Digital Artificial horizon
- EICAS monitoring system [as featured in a real Airbus]
- Map
- Fuel consumption Calculator
- Radio comutication for both pilots
- Autopilot, Altitude hold, Roll stabilisation
- a blackbox and flight tracking channel with frequency set to 19
- extendable-retractable Flaps
- extendable-retractable Spoilers
- extendable-retractable Landing gear
- Take-Give control to Captain or First Officer
- Fly By Wire Safety System [as featured in a real Airbus]
- Evacuation mode
- Fire supression safety systems
- 3 hydraulic systems
- Cabin light and heating controls
- Nav, Strobe, Landing, Taxi and beacon lights
If you are getting a master warning check: - If you have a fire Warning
- If you have a failure message in your PFD
- If you have are stallingHOW TO GET IN:
- You have to go behind the cockpit and press the red button labeled (open door)STARTUP PROCEDURE:1. Open Battery and avionics
2. Open All 3 PFD Controllers
3. Open all Hydraulic systems
4. Open EN1 and EN2 Fuel cutoff and pumps
5. Open EN1 and EN2 GEN and BUS
6. Open EN1 and EN2 Starters
7. Monitor EICAS Screen until engines are stabilized
8. Open BeaconAPU STARTUP PROCEDURE:1. Open APU Hydraulic pumps
2. Open APU Auto-StarterAUTOPILOT SETUP:
Tip Take a moment before takeoff to input your desired coordinates and Altitude to the aircraft!
1. Set up your waypoint coordinates on the Autopilot Coordinates Panel
2. Press the Engage Autopilot Button
3. Enable FDALTITUDE SETUP:1. Set up your desired Altitude on the Altitude Hold Panel
2. Press the ALT HOLD Button
3. Enable FDBLACKBOX AND FLIGHT TRACKING:On channel: 19 there is a composite signal transmition that holds flight informationTHROTTLE:* 120% Takeoff
* 120-100% Cruise [Its most eficient at 120%]
* 55-45% Landing
* 9-12% TaxiingCREDITS
Thanks to @Thias04 For this Awesome 3D Picture
3d MAP by Buunuu
CONSUMPTION 1x1 By krimwand
4 dials 1 display by michubushimax9
Advanced PFD by Ping|ArchimaedeConsider leaving a Rating and a Comment if you like the creation.
If you find any Bugs please report them down below
How do I download and install mods?
Simply click the blue button above. It will open the file hosting page with the mod repacked by us from the official source.How do I install this mod?
See the 'How to install' tab.Is this mod safe to use?
The mods are repacked as is, without any additional software, malware, or bloatware added. To check for viruses, use a reliable antivirus or upload the archive to a website like virustotal.com. Anyway, It's always a good practice to keep backups of your saves in case of mod incompatibility .
For vehicle mods
- Download the .zip archive containing the vehicle mod files.
- Locate your game's root folder.
- Navigate to
rom\data\preset_vehicles_advancedand extract the files there. - Rename both files to something recognizable, ensuring they share the same base name but different extensions.
- Launch the game and go to the Workbench's Presets tab to see the new vehicle mod.