ENDAIR E190 E2 [Stormlink Compatible]
Vehicle, Air, Rescue, Multi-vehicle, Exploration, Delivery, Technical, Creative, Land, Mechanical, Advanced, v1.2.24
ENDAIR E-190 E2The ENDAIR E-190 E2 is a passenger Regional aircraft developed by EPVIN Aviation Company
It has a Top speed of 290Knots, has a range of over 300KM. Also features a realistic cockpit!
The configuration is 2-2 in economy class and a 2-2 in business
DiscordGet the latest updates about my plane projects on my discord server! : https://discord.gg/8YrrV9YJHM
NOTE: ...
Author: EnderPilot
Created: 23 Apr, 2021 @ 9:25am
Updated: 24 Aug, 2021 @ 4:11am
Subscribers: 20627
Size (unpacked) : 5.640 MB
It has a Top speed of 290Knots, has a range of over 300KM. Also features a realistic cockpit!
The configuration is 2-2 in economy class and a 2-2 in business
CAPACITY: 48 Passengers
- Analog and Digital Artificial horizon
- EICAS Monitoring systems
- HSI Diagram
- Map
- Fuel consumption Calculator
- Radio comutication for both pilots
- Autopilot, Altitude hold, Roll stabilisation
- a blackbox and flight tracking channel with frequency set to 19
- extendable-retractable Flaps
- extendable-retractable Spoilers
- extendable-retractable Landing gear
- Take-Give control to Captain or First Officer
- Evacuation Mode
- Fire supression systems
- 3 hydraulic systems
- Cabin light and heating controls
- Nav, Strobe, Landing, Taxi and beacon lights
- Seatbelt and No Smoking Panel and warning
- Reverse thrust
How to use the PFD screen:
there is a 1x1 on the center console that has 3 options
1. NAV = Which has the Map and gps
2. EICAS = Which has the engine status
3. HSI = Which has a diagram of a conventional heading indicator
You can select either one by pressing them on the screen!HOW TO GET IN:Go to any of the front doors then press the button next of the small window
and then jump and grab the handle next to the door button and bring your self upSTARTUP PROCEDURE:1. Open Battery and avionics
2. Open All 2 PFD Controlers
3. Open all Hydaulic systems
4. Open EN1 and EN2 Fuel cutoff and pumps
5. Open EN1 and EN2 Starters
6. Open BeaconAPU STARTUP PROCEDURE:1. Open APU Fuel pump
2. Open APU StarterAUTOPILOT SETUP:
Tip Take a moment before takeoff to input your desired coordinates and Altitude to the aircraft!
1. Set up your waypoint coordinates on the Autopilot Coordinates Panel
2. Press the Engage Autopilot Button
3. Enable FDALTITUDE SETUP:1. Set up your desired Altitude on the Altitude Hold Panel
2. Press the ALT HOLD Button
3. Enable FDBLACKBOX AND FLIGHT TRACKING:On channel: 19 there is a compisote signal transmition that holds flight informationTHROTTLE:*120% Takeoff
*110-80% Cruise [Its most eficient at 110-120%]
*25% Landing
*11% TaxiingCREDITS
3d MAP by Buunuu
CONSUMPTION 1x1 By krimwand
AH (modded) by Markers662
HSI by hallyConsider leaving a Rating and a Comment if you like the creation.
If you find any Bugs please report them down below
How do I download and install mods?
Simply click the blue button above. It will open the file hosting page with the mod repacked by us from the official source.How do I install this mod?
See the 'How to install' tab.Is this mod safe to use?
The mods are repacked as is, without any additional software, malware, or bloatware added. To check for viruses, use a reliable antivirus or upload the archive to a website like virustotal.com. Anyway, It's always a good practice to keep backups of your saves in case of mod incompatibility .
For vehicle mods
- Download the .zip archive containing the vehicle mod files.
- Locate your game's root folder.
- Navigate to
rom\data\preset_vehicles_advanced
and extract the files there. - Rename both files to something recognizable, ensuring they share the same base name but different extensions.
- Launch the game and go to the Workbench's Presets tab to see the new vehicle mod.